E4d@box Timeline (CrazyMind Team)

December 2018

After several challenges, in December 2018, we decided to start a new branch of the project.

This is How “CrazyMind Team” began it’s journey ….

January 2019

Several boards iteration started to arrive. V0.1 appeared.

March 2019

New board dry run test.

This is the first test of the board. Just finished soldering V0.3. #esp32 with #Marlin 2.0 acceleration & feedrate variations on #Ender3 3d printer donor.

update 13 March 2019: Available functionalities tested so far:

*sd card= working

* x&y axis = working

* Z&E axis = working

*He&Hb= tested & working

* wifi Sta & Ap working

@ upload to sd via wifi= to be tested
*print wireless= to be tested
* Fan output = to be tested

* wifi Sta & Ap working ||||||||||||||||||||||||||||||||||||||||||||||

30 March 2019

#esp32 #Marlin2.0

Esp32 3D printer New board – wifi upload &print from sdcard

Second test, with some mods in the firmware

New custom board, #esp32 with #Marlin 2.0 based, with an #Ender3 hardware donor. Available functionalities tested so far: *print from sd card= working * x&y axis = working * Z&E axis = working *He & Hb control = working * wifi Sta & Ap working * upload to sd via wifi= Working *print wireless= Tested & Working * Fan output = working So far, all tests seem ok. Preparing for a 17-18 hours long 3Dprint run …… Soldering several boards to be tested by others… Huge Delta test will be run soon 🙂

16-20 October 2019

E4d@box board on the initial setup . #MFR19 – Rome 16-20 Oct

Version V1.14, proudly presented at #MFR19, by CrazyMind Team

More Info & tests to follow …